External Stationary Flagpoles

Price range: $938.00 through $2,850.00

The External Flagpole Series is the premium line of flagpoles you’ve been searching for. Our flagpoles are crafted from high-quality materials and built to withstand the elements, making them perfect for commercial use. With heights available up to 80 feet, these flagpoles are perfect for any space.

Tempered Aluminum for Lasting Durability
Low-Maintenance
$299 Flat Rate Shipping
Need a custom configuration? Call 800-962-0956 for sizes and colors not listed.
- +
SKU External-Stationary-Flagpoles Categories , Tags , Brand:
External Stationary Series — Why section

Why the External Stationary Series?

A fixed-display flagpole built for installations where permanence, curb appeal, and low upkeep matter most.

Built for Low Maintenance

With minimal external hardware and few moving parts, the External Stationary Series is among the lowest-maintenance poles in our commercial lineup. There is very little to adjust, service, or replace over its life. The flag mounts in a fixed display and stays put, making it ideal for monument signs, entrance displays, and set-and-forget installations.

Clean Architectural Look

With minimal hardware on the shaft (just a clean aluminum pole topped with a gold anodized ball ornament), the Stationary Series keeps an uncluttered profile. That makes it a natural fit for monument entrances, branded signage poles, decorative building facades, and any installation where the pole itself is part of the visual design.

Same Aluminum, Same Warranty

Built from the same 6063-T6 extruded aluminum as our full commercial lineup, and backed by the same commercial warranty on every configuration. Heights run from 15' through 35', suiting residential estates, small commercial properties, and entrance landmarks alike.

Two Finish Options

The only series in our aluminum lineup offered in Anodized Bronze, a warm architectural finish that pairs naturally with brick, wood, and traditional materials. Satin mill finish is also available for a modern or institutional look, giving you two ways to match the pole to its surroundings.

Standard Specifications

Included Components

OrnamentGold Anodized Aluminum Ball
TruckCast Aluminum Stationary Truck Assembly
Halyard TypeExternal Stationary (No Rope System)
Flash CollarSpun Aluminum
Ground SleeveGalvanized 16-Ga Corrugated Steel w/ Grounding Spike
Material6063-T6 Extruded Aluminum
Available Heights15', 20', 25', 30', 35'
Bottom Diameters3", 4", 5"
Wall Thickness0.125", 0.156", 0.188"
Available FinishesSatin (Mill Finish) · Anodized Bronze
WarrantyLifetime Structural
ComplianceBABA · BAA · NAAMM FP 1001
OriginMade in USA — Acworth, GA

* The External Stationary Series is a fixed-display flagpole with no rope or halyard system. The flag is attached directly and remains in a stationary position. Ideal for decorative, monument, and low-maintenance commercial installations.

External Stationary Series — All Configurations

Filter by height or scroll to compare all configurations. Shown in Satin finish — other finishes available, call for a custom configuration.

Exposed
Height
Bottom
Dia.
Wall
Thick.
Sections Top
Dia.
Set
Depth
Flag
Size
Wind w/
Nylon Flag
Wind
No Flag
SKU
15'3"0.125"12"2.5'3' x 5'113 mph172 mph213635
20'3"0.125"12"3'4' x 6'83 mph121 mph213636
20'4"0.125"12.5"3'4' x 6'109 mph164 mph213637
20'5"0.125"13"3'4' x 6'136 mph208 mph213638
20'5"0.156"13"3'4' x 6'160 mph243 mph213639
20'5"0.188"13"3'4' x 6'182 mph271 mph213640
25'3"0.125"12"3'5' x 8'63 mph84 mph213641
25'4"0.125"12.5"3'5' x 8'83 mph113 mph213642
25'5"0.125"13"3'5' x 8'98 mph148 mph213643
25'5"0.156"13"3'5' x 8'111 mph170 mph213644
25'5"0.188"13"3'5' x 8'124 mph191 mph213645
30'4"0.125"12.5"3.5'6' x 10'66 mph84 mph213646
30'4"0.125"22.5"3.5'6' x 10'66 mph84 mph213647
30'5"0.125"13"3.5'6' x 10'78 mph114 mph213648
30'5"0.125"23"3.5'6' x 10'78 mph114 mph213649
30'5"0.156"13"3.5'6' x 10'86 mph130 mph213650
30'5"0.156"23"3.5'6' x 10'86 mph130 mph213651
30'5"0.188"13"3.5'6' x 10'94 mph145 mph213652
35'5"0.156"13"3.5'6' x 10'73 mph107 mph213653
35'5"0.156"23"3.5'6' x 10'73 mph107 mph213654

Wind ratings are sustained wind speeds with and without a nylon flag flying. "With Flag" assumes the recommended flag size shown. This is a stationary series — no rope or halyard system is included. Shown in Satin finish. Anodized Clear, Black, and Dark Bronze are available by custom quote — call FlagCo for details.

Trusted by Schools, Hospitals & Government Facilities

Our flagpoles are found in front of institutions that demand reliability, curb appeal, and long-term performance. Here’s where they stand.

What Our Customers Say

★★★★★ 4.8 out of 5  Â·  Based on 47 verified reviews
★★★★★
"We ordered the 40' external halyard for our dealership. Installation went smoothly with a local contractor, and it looks impressive from the highway. The satin finish is holding up great after two years of Georgia weather."
Mike R. · Auto Dealership, GA
★★★★★
"Replaced an old steel pole that had rusted through. The aluminum is a game changer — no painting, no corrosion. The external halyard makes flag changes so much easier for our facilities team."
Sarah T. · Municipal Building, OH
★★★★☆
"Great pole and fast shipping. The quality of the hardware, especially the truck and bearings, is noticeably better than the competitors we priced out. Would buy again."
Dave K. · Church, TX

Frequently Asked Questions

An external halyard runs the rope on the outside of the pole, secured to a cleat at the base. This makes raising, lowering, and replacing the flag simple with no tools required. An internal halyard runs the rope inside the pole with a locking winch mechanism, which prevents unauthorized lowering. External halyard poles are more common for commercial applications where ease of maintenance is the priority.
 
It depends on the configuration. For example, a 25′ pole with a 5″ butt diameter and 0.125″ wall is rated for 98 mph with a flag flying, while the same height with a 6″ diameter and 0.188″ wall handles 168 mph with flag. Our 20′ poles range from 109–182 mph with flag. See the full configuration table above for exact wind ratings for every SKU. Contact us if you need help matching your local building codes.
 
Yes, commercial flagpoles require a concrete foundation. Every pole ships with a galvanized corrugated steel ground sleeve and grounding spike. Set depth varies by pole height (3′ for 20’–25′ poles, up to 8′ for the 80′ pole). You’ll need to pour a concrete foundation per the included specifications. Many customers hire a local contractor for this.
 

Most flagpoles ship within 5-7 business days. Multi-section poles (35’+) ship via freight carrier and require a delivery appointment. Free shipping on all orders over $500.

Each configuration has a recommended flag size, which you can see in the configuration table above. As a rule of thumb: 20′ poles fly a 4’×6′, 25’–35′ poles fly a 5’×8′ or 6’×10′, 40’–45′ poles fly an 8’×12′, 50’–60′ fly a 10’×15′ or 12’×18′, and the 80′ flies a 15’×25′. We sell all standard flag sizes.

A 1-section pole is a single continuous shaft, stronger and cleaner looking, but harder to ship and install for taller sizes. A 2-section pole ships in two pieces that sleeve together on-site. Wind ratings are the same for both. The 2-section option costs slightly more due to the additional machining but makes delivery and installation easier, especially for heights over 30′.

American-Owned Since 1989

Built by People Who Know Flagpoles

FlagCo has been designing, engineering, and manufacturing flagpoles in Acworth, Georgia for over 35 years. Every External Halyard pole is built with in-house tooling and quality-checked before it ships.

Not Sure Which Configuration You Need?

Our flagpole specialists have helped thousands of businesses choose the right pole. Call for a free consultation — we'll walk you through sizing, wind load requirements, and installation planning.

Call 800-962-0956

Related Products

Scroll to Top