Super Illuminating LED Uplight v2

The LED Direct Burial Uplight is a high end, commercial-grade in-ground burial light designed for 120V–277V commercial applications. Various beam spreads and color temperatures are available, allowing a customized finish for any flagpole installation.

Just apply power and go!

Recommended for Flagpole Heights of 35′ – 80′ You may need multiple lights for your application.

Note: If installing in concrete, the Concrete Pour Kit must be used—failure to do so will void the product warranty.

---

Features & Specifications

Construction: Rough-in housing made of black, 25% glass-filled polyester composite that will not flake, peel, or corrode. The LED light source is housed within an 88% copper-bronze alloy heat sink module for maximum heat dissipation. Trim plate is also made of 88% copper-bronze alloy. All fasteners are stainless steel.

Optical System: A molded polycarbonate 75mm compact reflector is optimized for the LED light source, keeping the fixture compact while using high-efficiency COB LEDs. The reflector smooths out the beam and removes unwanted color-over-angle artifacts. A 15mm low-iron tempered glass lens protects the light source.

Electrical System: Operates at 120V–277V input. A 40-watt LED source provides approximately 6,000 lumens (Cool White 5000K) at 90 CRI. 10kV internal surge protection is standard.

Mounting: This in-ground fixture should be installed according to the manufacturer’s installation instructions. Proper drainage and substrate must be provided around the fixture. Two ¾” and two ½” conduit entries are supplied on the underside of the housing; ¾” side entries available upon request. Internal cabling features anti-siphon wiring to prevent water intrusion, along with IP68 quick connects for fast change-out and ease of installation. Silicone O-rings and CNC-precision-machined components ensure proper sealing.

• Anti-siphon internal wiring to prevent water intrusion
• IP68 quick-connect wiring for fast installation/replacement
• Concrete Pour Kit (Sold Separately) required for concrete installations
• Rough-in housing may be pre-shipped at customer’s expense
• Fixture must be installed by a licensed electrician

Listings: ETL listed suitable for wet locations. IP68 rated to 3 meters. Meets US and Canadian safety standards. Rated for -40°C to 40°C ambient operation. RoHS compliant.

Downloads

• TL-TDBX-Install
• TL-TDBX-Spec

---

Frequently Asked Questions

Q: Is the LED Direct Burial Uplight suitable for all weather conditions? A: Yes. Its ETL wet-location listing and IP68 rating to 3 meters, combined with anti-siphon internal wiring, make it suitable for a wide range of weather and ground conditions.

Q: How energy-efficient is this uplight? A: The 40-watt LED source delivers approximately 4,200 lumens at 90 CRI, offering high-quality, energy-efficient illumination with minimal maintenance.

Q: Can I install this uplight myself? A: For safety and code compliance, installation should be performed by a licensed electrician, following the provided installation instructions.

Q: Is the concrete pour kit included with the uplight? A: No, the concrete pour kit is sold separately and is required for concrete installations.

---

Specifications Table