Talk to an expert800-962-0956

Architectural Solutions

Engineered Flagpole Systems for Commercial Projects

Tools, guide specs, and engineering data to specify commercial flagpoles from schematic design through submittal. No phone calls required.

Architectural flagpole installation at a commercial building entrance
Specified to NAAMM FP 1001-07 ASCE 7-10 CSI Section 107500 ASTM B 221 BABA / Buy America NaVOBA Certified Veteran's Business EnterpriseNaVOBA VBE Made in USA RIB SpecLink
A finished FlagCo commercial flagpole with spun gold ball ornament in the Acworth, Georgia facility, aluminum extrusion stock racked behind it

The Manufacturer

Commercial Flagpole Systems, Built in the USA

FlagCo designs and manufactures commercial aluminum flagpoles from 15 to 80 feet, rated 85 to 170 mph per NAAMM FP 1001-07. We are a vertically integrated U.S. manufacturer, not a distributor: key hardware is fabricated in-house in Acworth, Georgia, and every project is backed by the only interactive CSI flagpole spec generator in the industry. The result is a faster, more accurate spec from schematic design through submittal.

  • External Halyard and Revolving Poles
  • Internal Winch and Cam Cleat Poles
  • Reinforced Series for High Wind
  • Beacon Flagpole Lighting

Interactive Tools

Specify With Interactive Tools

Three tools surface the engineering data architects need, built around the full 41,375-zip ASCE 7-10 dataset and the FlagCo product catalog. Move from project location to a submittal-ready package in minutes. All run in the browser, no login, no PDF catalogs.

CSI 107500Word Download

Interactive Specification Builder

Generates a complete CSI MasterFormat Section 107500 (Flagpoles) guide specification. Enter your project location or wind speed, configure pole type, height, finish, and accessories, and download a formatted three-part spec (PART 1 General, PART 2 Products, PART 3 Execution) as a Word document. The only interactive flagpole spec generator in the industry.

Open the Spec Builder →
ASCE 7-1041,375 ZIPs

Wind Speed Lookup Tool

Enter a project address or zip code to retrieve the ASCE 7-10 design wind speed (3-second gust at 33 ft, Risk Category II, 700-year MRI) from a dataset of 41,375 U.S. locations. Returns the corresponding NAAMM FP 1001-07 flagpole rating and flags Special Wind Regions as defined in ASCE 7-10.

Look up wind speed →
PDF SubmittalShop Drawings

Commercial Flagpole Cut Sheet Builder

Configure a commercial flagpole by type, height, butt diameter, wall thickness, finish, and accessories, and generate a branded PDF cut sheet for your submittal package. Includes shop drawings, the FlagCo SKU, MSRP, and wind speed ratings per NAAMM FP 1001-07 for the configured pole.

Build a cut sheet →
Beacon illumination: Certain pole types support a top-of-pole LED Beacon that illuminates the flag after dark. See Beacon Resources for compatibility by pole type, lumens by model, DarkSky International approval status, and power source options (110V AC or solar).

Engineering Reference

Standards and Compliance Reference

Every FlagCo commercial flagpole is rated and specified to this framework. The Spec Builder generates CSI Section 107500 language incorporating all of these standards.

StandardFull TitleRole in Flagpole Specification
NAAMM FP 1001-07Guide Specifications for Design of Metal Flagpoles, National Association of Architectural Metal Manufacturers, 2007Primary flagpole rating standard. Defines structural design method, wind load testing, and rated capacities from 85 to 170 mph. All FlagCo poles carry a NAAMM FP 1001-07 wind rating.
ASCE 7-10Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10Wind speed reference standard currently in use. Design condition: 3-second gust at 33 ft above ground, Risk Category II, 700-year mean recurrence interval. ASCE 7-22 migration is in progress; dual-rated specifications are coming. The Wind Speed Tool returns ASCE 7-10 values for 41,375 U.S. zip codes.
CSI MasterFormat 107500CSI MasterFormat Section 107500, FlagpolesSpecifier's framework for flagpole procurement scope. FlagCo's Spec Builder generates a three-part Section 107500 guide spec (General, Products, Execution) formatted for direct inclusion in a project manual.
ASTM B 221Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and TubesGoverns the aluminum extrusion specification for flagpole shafts. FlagCo poles use 6063-T6 alloy sourced from U.S. extruders: 30,000 psi minimum tensile strength, 25,000 psi minimum yield strength.
ADMAluminum Design Manual (Aluminum Association)Governs structural design of the pole shaft and any reinforced pole configurations.
BABA / Buy American ActBuild America Buy America Act; Buy American Act, 41 U.S.C. 8301-8305FlagCo-manufactured poles (15-80 ft) are produced in Acworth, Georgia from U.S.-sourced aluminum extrusions and U.S.-fabricated hardware. BABA compliance documentation is available on request for federal projects. See FlagCo's BABA compliance page.
DarkSky InternationalDarkSky International (darksky.org), outdoor lighting approval program for flagpole BeaconsSelect FlagCo Beacon models carry DarkSky International approval when specified with the integrated visor accessory. Approval is per model, not universal across the Beacon line. See Beacon Resources for the full approval matrix.

External references: NAAMM.org | ASCE.org | darksky.org

FlagCo CNC machine fabricating flagpole components in-house in Acworth, Georgia

The Manufacturer

Commercial-Grade Flagpoles Built to Perform

Poles in the 15-80 ft range are designed, assembled, and quality-checked at the Acworth, Georgia facility, with key hardware fabricated in-house for tighter quality control and system compatibility.

  • In-House Manufactured Hardware
  • Engineered for Wind and Site Conditions
  • Internal and External Halyard Options
  • Architectural Finishes Available
  • Lifetime Shaft, 3-Year Workmanship Warranty
  • Proven in Civic, Commercial, and Institutional Settings
See BABA Compliance
FlagCo Beacon flagpole light installed and illuminated at the top of a pole

Flagpole Lighting

The Beacon Flagpole Lighting System

The Beacon is a top-of-pole LED lighting system that illuminates the flag evenly after dark, without ground-mounted fixtures. It mounts where the truck and finial would sit and is matched to the pole as part of an Illuminator package.

  • Per-Model DarkSky International ApprovalWith the integrated visor accessory; approval is per model, not universal.
  • Dual Lumens: 110V AC and 12V DC SolarOutput is stated for both power sources; see the spec matrix per model.
  • 110V AC or Solar Power Source
  • Compatibility by Pole Type

Beacons are specified and quoted through independent lighting agencies. Find your local representative.

The Beacon Resources
Federal building flagpole installation specified with FlagCo

Why FlagCo

Why Architects and Specifiers Work with FlagCo

A U.S. manufacturer with the engineering tools, compliance documentation, and product depth that commercial specifications demand.

  • Only Interactive CSI 107500 GeneratorNo other flagpole manufacturer publishes an interactive guide spec tool.
  • ASCE 7-10 Data for 41,375 LocationsSite-specific NAAMM rating directly from design wind speed.
  • Vertically Integrated U.S. Manufacturer6063-T6 shafts per ASTM B 221; hardware fabricated in Acworth, GA.
  • BABA / Buy American Act EligibleCompliance documentation available for federal projects.
  • Veteran-Owned Small BusinessNaVOBA Certified Veteran's Business Enterprise.
  • 85-170 mph, 15-80 ft ManufacturedTaller poles to 150 ft sourced from approved suppliers (not FlagCo-made).

Installations

Where FlagCo Is Specified

Commercial installations across municipal, government, corporate, and commercial sites. Manufactured in Acworth, GA.

Municipal courthouse three-pole installation lit at night
Municipal Courthouse
Military branch and state flags flying on a multi-pole memorial in a brick plaza
Military Memorial Plaza
Commercial facility with flagpole installation
Commercial Facility
Corporate campus flagpole flying the United States flag
Corporate Campus
FlagCo cut sheet generated by the Cut Sheet Builder: 50 ft external halyard revolving pole with shop drawing, component callouts, and full specifications table

Documentation

Submittal and Documentation Package

The Cut Sheet Builder and Spec Builder generate the core documents instantly. Additional items are available on request.

  • Cut Sheets (PDF)Shop drawings, specs table, wind ratings, FlagCo SKU.
  • CSI Section 107500 Guide SpecThree-part Word document for the project manual.
  • Shop DrawingsDimensional drawings per pole configuration.
  • BABA Compliance DocumentationOn request for federal projects (15-80 ft FlagCo-made poles).
  • Warranty DocumentationLifetime shaft; 3-year workmanship from substantial completion.
  • Material and Standards ReferencesNAAMM, ASCE 7-10, ASTM B 221, ADM boilerplate.
Build a Cut Sheet

Spec Platforms

Find FlagCo on Your Spec Platforms

FlagCo guide specification content is live on RIB SpecLink today. Additional platforms are in development. If your firm uses a platform not listed here, contact FlagCo directly for specification language and product data.

Live

RIB SpecLink

FlagCo guide specification for CSI Section 107500 is published in SpecLink. Log in to your SpecLink account and look for FlagCo under CSI Section 107500 (Flagpoles).

Coming Soon

MasterSpec (AIA)

FlagCo product data and guide specification language are being prepared for the MasterSpec platform. Not yet available.

Coming Soon

BIMsmith

FlagCo specification content for BIMsmith is planned. Revit families are a separate initiative. Not yet available.

BIM objects and Revit families: Parametric Revit families for FlagCo flagpole types are in development and not yet available for download. If your project requires BIM objects before those are published, contact FlagCo to discuss options.

Talk to FlagCo's Engineering and Specification Team

Have a spec question, a project with unusual wind conditions, or a federal project with BABA requirements? The FlagCo engineering and spec team handles architect inquiries directly.

770.974.0507, Acworth, GA corporate office

FAQ

Frequently Asked Questions

From architects and specifiers on FlagCo projects.

Does FlagCo provide a CSI guide specification for flagpoles?
Yes. FlagCo's Interactive Specification Builder generates a complete CSI MasterFormat Section 107500 (Flagpoles) guide specification. The tool walks through project wind speed, pole type, height, finish, foundation type, and accessories, then produces a formatted three-part spec (PART 1 General, PART 2 Products, PART 3 Execution) that downloads as a Word document. It is the only interactive flagpole guide specification generator in the industry. Access it at flagco.com/flagpole-specification-generator/.
Where can I find FlagCo specifications on industry spec platforms?
FlagCo's guide specification for CSI Section 107500 is currently published and live on RIB SpecLink. Log in to your SpecLink account and look for FlagCo under CSI Section 107500 (Flagpoles). MasterSpec (AIA) and BIMsmith are in development and not yet available. If you need specification language for a platform not listed, contact FlagCo at 770.974.0507 or through the contact page.
Are FlagCo flagpoles compliant with Build America Buy America (BABA) and the Buy American Act?
FlagCo-manufactured commercial flagpoles (15-80 ft) are produced at the Acworth, Georgia facility from U.S.-sourced aluminum extrusions and U.S.-fabricated hardware. They are eligible for Buy American Act and Build America Buy America Act compliance on federal projects. BABA compliance documentation is available on request. Flagpoles above 80 ft that FlagCo sources from approved suppliers carry separate compliance terms and are not FlagCo-manufactured; confirm with FlagCo before citing those in a federal procurement spec. See the BABA compliance page for detail.
What wind speed standard do FlagCo specifications use, ASCE 7-10 or ASCE 7-22?
FlagCo's current tools and wind speed dataset reference ASCE 7-10 (Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10). The design condition is a 3-second gust at 33 feet above ground for Risk Category II, corresponding to a 700-year mean recurrence interval. ASCE 7-22 migration is in progress; dual-rated specifications are being developed. The 2024 IBC adopted ASCE 7-22 for structural wind loads, and state code adoption is on a rolling schedule (typically a 1-3 year lag). If your jurisdiction has adopted ASCE 7-22, contact FlagCo to discuss appropriate spec language in the interim.
Are Revit families or BIM objects available for FlagCo flagpoles?
Parametric Revit families for FlagCo commercial flagpole types are in development and are not yet available for download. BIMsmith product content is also in development. If your project requires BIM objects before those are published, contact FlagCo directly at flagco.com/contact-us/ or 770.974.0507 to discuss project-specific support.
What aluminum alloy and standards govern FlagCo flagpole shafts?
FlagCo flagpole shafts are produced from 6063-T6 aluminum alloy per ASTM B 221 (Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes), sourced from specialist U.S. extruders. The 6063-T6 alloy provides a minimum tensile strength of 30,000 psi and minimum yield strength of 25,000 psi, which are the values cited in NAAMM FP 1001-07 and in FlagCo's Section 107500 guide spec text. Structural design of the shaft follows the Aluminum Design Manual (ADM). Structural blind rivets are 5056-H32 aluminum, 3/16 inch diameter, flush countersunk.
What heights does FlagCo manufacture, and what is available above 80 feet?
FlagCo manufactures commercial aluminum flagpoles from 15 to 80 feet in six pole types: External Stationary, External Revolving, Internal Winch, Internal Cam Cleat, Reinforced Winch, and Reinforced Cam Cleat. For projects specifying poles above 80 feet, FlagCo can source and supply poles up to 150 feet from approved suppliers. Those poles are not FlagCo-manufactured; they carry separate warranty terms and require separate evaluation for BABA compliance. The manufactured-vs-sourced distinction matters for federal procurement spec language in Section 107500.
What is included in a FlagCo submittal package?
A standard FlagCo submittal package includes: a PDF cut sheet with shop drawings, pole dimensions, wall thickness, finish, and wind speed ratings per NAAMM FP 1001-07; the FlagCo product SKU; and a CSI Section 107500 guide specification generated by the Spec Builder. For federal projects, BABA compliance documentation is available on request. For beacon-equipped poles, the Beacon cut sheet and compatibility documentation are also available. Use the Cut Sheet Builder and Spec Builder to generate these documents, or contact FlagCo for project-specific submittal coordination.
What is the warranty on FlagCo commercial flagpoles?
FlagCo provides a lifetime warranty on the aluminum pole shaft. Workmanship and all other components are warranted for 3 years from the date of substantial completion, under normal installation and use conditions. These terms apply to FlagCo-manufactured poles (15-80 ft). Poles sourced from approved suppliers above 80 ft are subject to the source manufacturer's warranty terms. Contact FlagCo at 770.974.0507 or through flagco.com/contact-us/ for warranty documentation or claims.
The specifications, standards references, and engineering data on this page are provided as a design aid for architects, specifiers, and engineers. The Architect of Record is responsible for verifying all specifications against applicable building codes, local wind speed requirements, and project-specific conditions before incorporating them into contract documents. Wind speeds in Special Wind Regions designated by ASCE 7-10 may exceed mapped values; consult a licensed structural engineer for those sites. FlagCo's specification tools are provided as a starting-point resource, not as engineering services. For project-specific technical questions, contact FlagCo at 770.974.0507 or flagco.com/contact-us/. Global Flags Unlimited, LLC dba FlagCo, 3600 Cantrell Industrial Ct, Acworth, GA 30101.
Scroll to Top